It’s all too common to see a pair of sprockets connected through a chain, driving the rear wheel of a motorcycle. However, it’s not the only final drive system used on motorcycles. Belt drive and shaft drive are the other two final drive systems, though they are not as ubiquitous as chain drive systems. So what exactly are the various advantages and disadvantages of the three drive systems, and what is it about chain drives that make them the preferred choice? In this article, we will discuss all three final drive systems for a motorcycle in detail, along with their favourability for various applications and their respective pros and cons.
Explore TVS Apache's new Bike with High Performance, Advanced Design, & Features. #RestlessToPlay
Know More
1. Belt Drive
A belt drive system isn’t as common as a chain drive system, though in terms of popularity, it stands at a distant second position. This setup comprises of a driving pulley towards the gearbox output shaft and a driven pulley at the wheel – the two pulleys are connected by a belt which has teeth, or grooves on the inner side, matching the grooves on the outer side of the pulleys. The belt is made of a rubber-like, but mostly a very strong synthetic material which lasts a very long time. Modern drive belts are strengthened with steel wires inside and Kevlar coating outside – such belt systems can last really long. You can expect a well maintained belt drive on a motorcycle to last in excess of 100,000 km or even more. Unlike chain drive, which requires very frequent cleaning, tightening and maintenance, belt drives are relative maintenance free. They run clean as they don’t have to be lubricated with sticky lubes and don’t require cleaning either. Belt drive systems also run much smoother, with much less jerks as compared to chain drives, and produce incomparably less noise too.
Seems too good to be true, doesn’t it? So if a belt drive system offers so many advantages, then why aren’t they used more commonly? Well, as the case with every good thing in the world, they have their own downsides too. Belt drive systems are essentially costlier to produce than a chain-sprocket system. Secondly, the power loss during the transmission, depending on how the system has been set-up, ranges anywhere from 9 to 15 percent, which is quite high compared to a chain drive system. Also, while a belt drive system does not require regular maintenance, if ever the belt or any other components of the system give way, they are much more expensive to replace than the vanilla chain and sprocket setup.
Seems too good to be true, doesn’t it? So if a belt drive system offers so many advantages, then why aren’t they used more commonly? Well, as the case with every good thing in the world, they have their own downsides too. Belt drive systems are essentially costlier to produce than a chain-sprocket system. Secondly, the power loss during the transmission, depending on how the system has been set-up, ranges anywhere from 9 to 15 percent, which is quite high compared to a chain drive system. Also, while a belt drive system does not require regular maintenance, if ever the belt or any other components of the system give way, they are much more expensive to replace than the vanilla chain and sprocket setup.
2. Shaft drive
To start off, shaft drive systems are the most expensive of the three systems we have here, and by some margin. They are, however, the sturdiest of the three, very smooth, and hardly ever need any maintenance. If designed and engineered well, drive shafts often last the life of a motorcycle without requiring any servicing or maintenance whatsoever. This system, as the name suggests, comprises of a shaft that’s connected to the gearbox output via a universal joint, which is essentially a coupling that facilitates transmission of rotary power at any selected angle. At the other end, the shaft is connected to the rear wheel hub via a spiral bevel gear. The bevel gear turns the direction of rotation of the shaft by 90 degrees to make the wheel turn. This entire drive system is bathed in oil for lubrication and sealed to protect it from any external elements, which makes it totally maintenance free.
Since shaft drive systems are heavy, expensive, and by themselves require more torque to work efficiently, they are not used on low-capacity or economy oriented motorcycles. They are used on large capacity (generally 600cc or above) motorcycles which produce good amounts of torque. Also, since shaft drive systems are very sturdy and reliable, they are often used in motorcycles built for the purpose of adventure, sports touring or adventure touring. In essence, these systems lend themselves very well for applications where the motorcycles have to run for very long distances, or in treacherous conditions, where minimizing breakdown possibility is top priority.
So if they’re the sturdiest, then why don’t all expensive bikes use them, since cost doesn’t matter so much for the exotic machines? Well, to start off, they are way heavier than belt or chain drive systems, which limits their usage in high-performance supersport machines where weight saving is crucial. Secondly, these systems lose a lot of power during transmission. They are the most inefficient of the trio we have here and may bleed from 20 to 25% of the power by the time they transfer it to the rear wheel. This is not good for performance oriented motorcycles where it’s extremely important to make every horse count.
3. Chain Drive
Now that brings us to the trusty old chain drive systems. Comprising of a simple chain of linkages connecting sprockets, this is the drive system that an overwhelming majority of motorcycles implement. The sprocket connected to the gearbox output shaft is the driving sprocket and the one at the rear wheel is the driven sprocket, both are connected through a chain, which also comes in a variety of designs, but we’ll leave that discussion to some other day.
Now that brings us to the trusty old chain drive systems. Comprising of a simple chain of linkages connecting sprockets, this is the drive system that an overwhelming majority of motorcycles implement. The sprocket connected to the gearbox output shaft is the driving sprocket and the one at the rear wheel is the driven sprocket, both are connected through a chain, which also comes in a variety of designs, but we’ll leave that discussion to some other day.
Despite all those negatives, chain and sprockets are the most efficient at transmitting power, with only 1 – 4 % transmission loss. That’s significantly less than belt drives, and a no-contest as compared to the heavy losses incurred by shaft drives. Chain drives are also very simple in their functioning and are very cost-effective to run and replace too.
While it’s extremely rare to see a chain snapping, if that ever happens (happens in some extremely rare cases only when abused for extended durations), they can cause a direct injury to the rider, or just tangle themselves around the sprockets to lock the rear wheel and cause an accident. However, with their supreme efficiency at transmission, relatively light weight, simple construction and cost effectiveness, chain drive systems rule the roost in the modern motorcycling world.
We hope this detailed piece on various motorcycle drive systems answered most of your queries about them. If, however, you still have any questions pertaining to chain, belt or shaft drive systems on motorcycles, do share them with us via comments, and we’d be happy to answer them. Do not forget to share this article with your friends who might find it useful. We have provided all the social network tools to share them right here. Ride safe!
