The Best Mounting and Poster Putty for Affixing Your Artworks to Various Surfaces (2024)

FAQs

Can you use mounting putty for posters? ›

What surfaces will Gorilla Mounting Putty bond to? Gorilla Mounting Putty is great for indoor and temporary outdoor use on paper, painted walls, wood, tile, metal, posters, plastic, glass, and more.

Use removable mounting tape (3M makes a great option), poster glue dots, or Scotch brand Magic Tape (not to be confused with regular Scotch tape), all of which are strong enough to keep an unframed poster on the wall and are uniquely designed to peel off your walls without leaving damage behind.

Our Duck^® Brand Poster Putty offers a temporary and reusable alternative to nails, screws, staples and glue. Designed for removability, the putty won't damage your walls and removes cleanly from a variety of surfaces.

Acrylic types of wall putty are more expensive than cement types but they last longer because the acrylic allows it to resist water damage better. Acrylic types can be used on both plaster and masonry surfaces, and this type will provide a smooth finish that is paintable,including exteriors and interiors of a building.

This wondrously tactile putty adheres to your favorite poster, photo, or artwork and mounts effortlessly to a variety of surfaces–even rough, painted cinderblock. It removes easily from both your object and surface, and is up for being used again, and again.

Easy-to-install posters feature an adhesive backing. Stick them to almost any smooth, clean wall, as a perfect addition to an office, classroom or store.

Washi tape and mounting sticky putty are the best options for hanging posters, according to Herrero. However, these methods will only work with lightweight artwork printed on paper. For the best results, the surface and poster must be flat and clean.

A kneaded eraser, also commonly known as a putty rubber, is a pliable erasing tool used by artists. It is usually made of a grey or white unvulcanized rubber (though it can be found in many different colors, such as green, blue, hot pink, yellow, and so forth) resembling putty or chewing gum.

as expected from Gorilla, this mounting putty is very strong and very reliable. i will say though when it comes to the adhesion, it works best with a relatively thick material.

Wall putty is a white cement-based powder made of polymer and other minerals that make the wall look smoother. It is primarily used to fill in cracks and holes in walls and prepare an even wall surface before applying paint.

What is best for putting posters on walls? ›

Command strips are great for posters. They're easy to stick and remove. They're an easy way to hang posters without damaging any paint.

Dampen paper towels with warm water and apply liquid dish soap. Use the soapy towel to work over the area in a circular motion to loosen and remove as much putty as possible. Spray residue stain with All Purpose cleaner and wipe with paper towels. Repeat as needed.

Alcolin Sticky Putty

Ideal for gallery spaces and museums, this archival putty is top notch. Acid and solvent free, it won't damage your work or walls.

It is super strong, able to hold up to 1 pound, so it's perfect for mounting a small whiteboard or blackboard. This nontoxic putty is safe and easy to use, and it won't leave residue when removed.

Product Overview

Loctite Fun-Tak Mounting Putty is a reusable, repositionable adhesive that is a convenient alternative to use whenever your creative project requires tape, tacks, staples, or magnets.

What is dry mounting? Dry mounting is a process in which a print is bonded to a mount using an archival adhesive. This is ideal for presenting your artwork to the highest standard.

How do you make a poster adhesive? ›

Wheat paste is a simple DIY adhesive popular among street artists, guerilla marketers, and craft enthusiasts. You can make a simple wheat paste by whisking flour and cool water together and then adding it to boiling water. Apply the wheat paste using a paint brush or roller if you're hanging a poster or art.

We recommend using a special sticky tape applied to the wall, which sticks to the back of the frame or picture. It's quick, easy, and, unlike nails, won't cause permanent damage to the wall. Tape is especially handy for homeowners who like to move things around and redecorate every now and then.

Acrylic putty smoothens and levels the bare walls by covering their cracks and dents. It increases the durability of the paint on the walls with its special acrylic binders. The putty also lends extra whiteness to the walls, so that the colour of the paint comes out really well and looks richer and more beautiful.

Putty application is a primary step for long lasting painting result. It's very important if you are doing a fresh painting.

This putty removes cleanly from most surfaces and can be reused or moved easily. Duck Brand Poster Putty holds up to 1 pound and sticks to most surfaces, including wood, tile, brick, metal, plastic, porcelain, glass and more!

Some such vital components are Plaster of Paris, also known as POP, and Wall Care Putty. Made from Gypsum, Plaster of Paris (POP) is a white powder that is used for giving fresh coats to the walls, giving shapes to structure, or creating casts, and likewise.

How to Apply the Putty Primer. First, you'll want to scoop a pea-size amount of product and rub it between your fingers to warm it up before applying. Once the product has warmed up, use your fingers to gently press it into your skin, starting from the center of your face and pressing outward.

What is the best way to put pictures on a wall? ›

How to arrange pictures on a wall. As a rule of thumb, hanging pictures at eye level is a safe option. This generally means positioning the picture so its midpoint is 57-60 inches from the floor, depending on the ceiling height of the room – and your height, of course.

The most common way to hang artwork without nails is by using Command Strips ($12.17 for 14, amazon.com). You simply plan how you want to arrange your picture, then apply one half of the hook and latch strip to the wall and the other to the frame.

A: Devices called brick clips or brick hangers allow people to hang pictures, mirrors and other objects on walls without drilling into the brick. Two examples are Brick Clips by a company called Tuopu (10 for $14.99 on Amazon) and OOK Brick Hangers (two for $2.48 at Home Depot).

Tip #1: Hot Glue Gun

A low-temperature hot glue gun is a great tool for getting posters, banners, trimmers and other classroom decorations to stick to the cinder block walls. At the end of the year, the glue pulls off easily from the wall and does not do any damage.

Press the item firmly onto the mounting surface, such as a wall or a container. Removal: Remove the putty carefully by peeling it from the surfaces. Remove putty residue by dabbing the surface with a piece of putty.

Because of it's adhesive nature, poster putty could be difficult to remove at times…the longer it is on the wall, the more difficult it will likely be to remove.

We'd only suggest putty on mounted posters or posters that are printed on a rigid material. Using an overabundance of putty on paper or card stock posters might cause a bit of rumpling at the contact points, which you would not want if you are going for a neater appearance.

Command strips are great for posters. They're easy to stick and remove. They're an easy way to hang posters without damaging any paint.

Household putty (aka Sticky Tack, Blu Tack, mounting putty, museum putty) is one of those products that can solve a slew of household predicaments in a matter of seconds.

The ARTnews Recommends Editors

Protect walls from damage and posters from falling by using mounting or poster putty to hang decor. Unlike nails, tacks, and duct tape, mounting and poster putty won't leave holes or peel paint.

What is poster tack made of? ›

Although the exact recipe for blu-tack is a trade secret, we can work out roughly what's in it: a combination of synthetic rubber compounds and mineral oil, along with mineral fillers and pigments.

Next, pick an adhesive, like removable double-sided tape or removable adhesive putty. Attach the adhesive to the back of the poster, including all 4 corners and the center. With the adhesive on the poster, push the top 2 corners against the wall, then work down the sides as you keep the poster taut.

To hang a foam board poster, you will need to use two nails that are at least an inch long. Place the nail in the wall and place your thumb over it. With your other hand, hold the top of the foam board. Push down on both hands with enough force so that the nail is pushed all of the way into the wall.

Bostic Blu-Tack is the is the original reusable adhesive.